Accessories
Coolant Filtration System ( Fine Filtration System for Tool Grinding)
Technology ( Edge Filtration )
This type of filter element utilizes stacks of paper discs tightly compressed on a tubular core to form a continuous cylindrical surface where contaminants are filtered at the edge of the Filter Candles.
Method of operation:
- Sludge box
- Semi clean tank section
- Clean tank section
Working Principle & Advantages of Using Fine Filtration syste
Step 1 Filtering Mode
In normal operation, dirty oil from the Grinding machine is taken from the TGT dirty oil storage area and introduced into the filter vessel. Oil is forced to the center of each element. All particles larger than one micron are trapped on the O.D. of the filter element. Clean oil is then deposited into the TGT's clean oil storage area and is delivered to the Grinding machine upon demand.
Step 2 Draining Mode
Prior to backflushing the elements, the filter vessel is drained into the dirty storage area through the use of compressed air.
Step 3 Backflushing Mode
The backflushing mode is fully automated. Compressed air is introduced through the top and center of each element. Dirt and debris are forced out of the filter vessel into the paper lined sludge box, which should be emptied approximately once a month. The entire backflushing procedure takes only six minutes.
Advantages of TGT Fine Filtration System
- Automatic operation without the use of consumables
- low maintenance cost
- Extended Coolant Life
- Increase Surface finish of Product
- Decrease Production Cylce time
- Reduce Operating Cost
- Recovery of Carbide Dust
- Filtration down to 3 µm
